News

Wire-to-board connector is a widely used electronic component, with good transmission capability, mainly used in financial manufacturing, medical equipment, communication networks, home appliances, office equipment and other industries, through different connection methods (such as pin bar, FPC connector connector, thickening wire-to-board connector, etc.), to provide a variety of different application scenarios.   In the field of communication equipment, wire-to-board connectors are widely used in various communication equipment, such as mobile phones, computers, televisions, etc. These devices need to connect circuit boards and wires through wire-to-board connectors to transmit signals and facilitate equipment maintenance. The stability and high-speed transmission capability of wire-to-board connectors directly affect the reliability and service life of equipment. In the field of computer equipment, wireline board connectors are widely used in a variety of computer equipment, such as servers, desktops, laptops and so on. These devices need to connect circuit boards and wires through wire-to-board connectors to transmit signals and facilitate equipment maintenance. The stability and high-speed transmission capability of wire-to-board connectors directly affect the reliability and service life of equipment.   In the field of consumer electronics, wire to board connectors are widely used in a variety of consumer electronic products, such as smart phones, tablets, digital cameras, etc. These devices need to connect circuit boards and wires through wire-to-board connectors to transmit signals and facilitate equipment maintenance. The stability and high-speed transmission capability of wire-to-board connectors directly affect the reliability and service life of equipment.   In the field of automotive electronics, wire-to-board connectors are widely used in a variety of automotive electronic equipment, such as car audio, navigation systems, safety systems, etc. These devices need to connect circuit boards and wires through wire-to-board connectors to transmit signals and facilitate equipment maintenance. The stability and high-speed transmission capability of wire-to-board connectors directly affect the reliability and service life of equipment.   In the field of medical equipment, wire-to-board connectors are widely used in various medical equipment, such as medical devices, medical imaging equipment, medical monitoring equipment, etc. These devices need to connect circuit boards and wires through wire-to-board connectors to transmit signals and facilitate equipment maintenance. The stability and high-speed transmission capability of wire-to-board connectors directly affect the reliability and service life of equipment.   In general, the use of wire-to-board connectors is very wide, it can be applied to a variety of electronic equipment, such as communication equipment, computer equipment, consumer electronics and automotive electronics and other fields, to ensure the normal operation of equipment. With the continuous popularity and development of electronic equipment, the demand for wire-to-board connectors is also increasing.

A board-to-board connector is a key component in the electrical connection between electronic devices, and its principle is to tightly connect one circuit board to another through a pair of pins. This connector is widely used in a variety of different industries and applications, such as power systems, communication networks, financial manufacturing, elevators, industrial automation, medical equipment, office equipment, home appliances, military manufacturing, etc.   The basic structure of the board-to-board connector consists of a pair of pins and a socket, and the size and shape of the pins and sockets can be customized according to different application requirements. Pins are usually made of metal materials with good electrical conductivity and mechanical strength. Sockets are usually made of plastic or metal materials, with good insulation and corrosion resistance.   Board-to-board connectors work by inserting pins into sockets to achieve electrical connections between circuit boards. In the connection process, the contact pressure and fit height between the pin and the socket are very important factors, which will directly affect the performance and stability of the connector. Board-to-board connectors are widely used, and the following are some common application scenarios:   1. Connection between electronic devices: board-to-board connectors can connect different electronic devices, such as mobile phones, computers, TVS, stereos, etc.   2. Industrial control system: board-to-board connectors can connect various sensors, controllers, actuators and other devices to form a complete industrial control system.   3. Automotive electronic system: board-to-board connectors can connect various electronic devices of the car, such as engine control system, airbag system, navigation system, etc.   4. Medical equipment: board-to-board connectors can connect a variety of medical equipment, such as monitors, electrocardiogram machines, ventilators, etc.   5. Aerospace equipment: board-to-board connectors can connect a variety of aerospace equipment, such as satellites, spacecraft, drones, etc.   When choosing a board-to-board connector, you need to consider basic issues such as circuit size, stack height and width, as well as factors such as whether you need a top-mounted socket and whether you need a gold-plated or silver-plated connector. In addition, the test inspection of the board-to-board connector includes observing the loading voltage, installation size, precision, anti-stay design, lead in the material, contact pressure, fit height, etc.   In short, the board-to-board connector is a very important electronic device connection component, and its principle is to connect a circuit board and another circuit board closely through a pair of pins. Its applications are very wide, including electronics, communications, power, home appliances, office equipment, automobiles, industrial equipment, medical equipment, military and other fields. When selecting a board-to-board connector, it is necessary to select a connector with high speed, high power density and light weight according to the specific application requirements and circuit design scale to ensure the performance and stability of the connector.

A floating board-to-board connector is a mechanical structure used to connect two or more surfaces to each other. This connector usually consists of two or more metal plates, each of which has holes and raised parts to make contact with the other. When objects that need to be connected have different geometry shapes, floating board-to-board connectors can provide a flexible and reliable solution. By opening corresponding holes in the two metal plates and installing raised parts, they can be tightly joined together to form a whole. In this way, even if the two surfaces have different shapes, a stable connection can be achieved. One of the advantages of a floating board-to-board connector is that it can withstand large loads. Because there is a certain gap between the connectors, the pressure can be effectively dispersed, thus avoiding the occurrence of stress concentration. In addition, the flexibility of this structure makes it able to adapt to a variety of different application scenarios and requirements changes are also improved. For example, when an assembly or disassembly operation is required, a floating board-to-board connector can be achieved by adjusting the relative position of the two boards. Another important feature is that floating board-to-board connectors are more reliable than traditional welded or threaded connections. Because of the existence of the gap between the connecting parts, the connection part is not vulnerable to corrosion and wear and failure. At the same time, the floating board-to-board connector also has good vibration resistance and can maintain stability in the environment of high-frequency vibration. This is especially important for some equipment that needs to operate in a vibration environment However, floating board-to-board connectors also have some disadvantages. First of all, this connection requires a precise design and manufacturing process to ensure the quality of its connection. Secondly, due to the large gap between the connectors, it may lead to problems such as water leakage and leakage. Finally, floating board-to-board connectors are usually suitable for small or simple connection occasions, and may not be suitable for large complex structure connections. In summary, the floating board-to-board connector is a very practical mechanical structure that enables reliable connections on surfaces of different shapes. Although it also has some shortcomings, but with the continuous progress and development of technology, I believe that these problems will be better solved.

A power connector is an important component used to connect a power supply to an electronic device and usually consists of two parts, one end connected to the power supply and the other end connected to the electronic device. Power connectors are typically used in the following ways: 1. to transmit power signals: the power connector transmits the power signals from the power supply to the electronic equipment, through which the power supply is stabilised/smoothly connected to the various modules and boards needed in the electronic equipment to ensure that the electronic equipment can operate properly. 2. Provide stable power supply: The design of the power connector takes into account the output power requirements of the power supply, as well as the environmental requirements of the connected equipment for the use of the power connector and other factors, to provide a stable and reliable power supply for electronic equipment.Slot Connector 3. Hot-swappable function: The power connector also has the feature of plugging and unplugging, so it can bring great convenience, for example, for equipment that needs to be moved frequently, the power connector can provide convenient and fast plugging function.Board To Board Connector 4. Protection of electronic equipment: Power connectors can also provide protection for electronic equipment. For example, the power connector can provide overvoltage protection, overcurrent protection and other circuit protection functions to protect equipment from circuit damage, short circuits and other damage.Floating Connector 5. Easy maintenance: The presence of power connectors also greatly facilitates the maintenance of equipment. In the event of an electronic equipment failure, the power connector can be more easily detached for inspection and repair. In summary, the power connector plays a very important role in electronic equipment, it provides a stable power supply, fully protect the operation of electronic equipment and the use of the environment, but also to facilitate the maintenance and use of equipment.

A power connector is a connector used to connect between a cable and a power supply device, also known as a power plug or power socket. It is an energised interface for inserting power into the power connector and connecting the power connector to the device. Its main function is to transmit power and signals in electronic equipment and to ensure that the equipment can operate properly. In modern electronic equipment, power connectors have a very important role to play as they ensure the reliability and stability of the power supply to the equipment.Power Connector Power connectors are used in all types of equipment, including computers, mobile phones, cameras, audio equipment, televisions, games consoles, UPS, military equipment and many more. Different types of equipment require different types of power connectors, for example, laptops usually require a DC power connector, while gaming consoles usually require an AC power connector.Wire To Board Connector A power connector usually consists of two parts, a power plug and a power socket. The power plug is the part that is attached to the power cable and usually has several metal pins or connectors to allow the plug to be connected to the socket. The metal pins or connectors on the plug are usually inserted into the corresponding positions on the socket to connect to the power supply. The power socket is mounted on the device and usually has several jacks to allow the plug to be inserted inside it. The sockets are usually connected to the circuit board inside the device in order to transfer power to the device's internal circuitry.Wire Harness The types of power connectors can be divided into two main categories depending on how they are connected, namely the solder type and the plug-in type. The solder type of power connector needs to be fixed to the device by means of soldering on the circuit board, while the plug-in type of power connector is inserted into the device by means of a plug. The plug-in type of power connector has the advantage of being easy to install and replace as it can be easily unplugged from the equipment without the need for soldering or other fixing. The selection of power connectors needs to take into account factors such as accuracy and durability, as it affects the performance and reliability of electronic equipment. When selecting a power connector, the following factors need to be considered, including connector durability, reliability, connection method, contact resistance, electrical properties, mechanical properties, etc. In summary, power connectors are an important part of electronic equipment, ensuring that the equipment can function properly, as well as affecting the durability and reliability of the equipment. A good power connector should be of high quality and stability to ensure that the equipment can continue to operate efficiently.

Board-to-board connectors are used in a wide range of electronic products and their main advantages include 1. Can improve the assembly process of electronic products and simplify the mass production process.Slot Connector 2. Good contact resistance and resistance to mechanical shock.Board To Board Connector 3. Resistant to salt spray, ageing and ultraviolet light, and can adapt to harsh environments.Floating Connector 4. Easy to maintain, components can be replaced quickly when they fail. 5. The components can be renewed at any time, replacing the old ones directly with new ones, easy and convenient to operate. 6. Superb electrical transmission function, stable and reliable connection. In addition, board-to-board connectors have the following advantages: 1. It can reduce the size and weight of electronic products, thus improving the portability and competitiveness of the products. 2. It can effectively improve the reliability and safety of electronic products and reduce the failure rate and maintenance costs due to component damage. 3. It is conducive to improving the service life and efficiency of electronic products and reducing the maintenance costs of products. 4. Can achieve rapid replacement and upgrade of components, thereby improving the performance and competitiveness of products. In summary, the board-to-board connectors in electronic products have a broad application prospect and great potential for development.

A board-to-board connector is a connector used to connect circuit boards to each other. The difference between this connector and other connectors lies mainly in their design and purpose. While conventional connectors are mainly used to connect open cables and power cables, board-to-board connectors are specifically designed for connecting circuit boards. Below we will detail the differences between board-to-board connectors and other connectors.Wire Harness I. Design differences Board-to-board connectors and traditional connectors in the design of certain differences. Traditional connectors are mainly considered cable connections and use a lot of threads and keying structures to ensure the reliability of the connector. For board-to-board connectors, it is mainly designed to connect circuit boards, so their design is more compact and detailed, providing a more reliable and stable connection to the board.Wire To Board Connector Second, the connection concept is different Conventional connectors are mainly used to connect two ends of a cable, for example, for connecting a monitor to a computer. For board-to-board connectors, it is mainly used to connect different modules and components inside the circuit board. They therefore have a different connection concept and differ in their operation.Power Connector Third, the connection requirements are different There are also some differences between board-to-board connectors and conventional connectors in terms of connection requirements. As board-to-board connectors are used to connect modules and components within a circuit board, they require a more stable and reliable connection to ensure the proper functioning of the entire system. In addition, the board design process, the board-to-board connector design also needs to meet certain specifications and requirements to ensure the compatibility and consistency of the connector with other components on the board. Fourth, the scope of application is different Board-to-board connectors are suitable for connecting modules and components inside the board, while traditional connectors are mainly used to connect the two ends of the cable. Therefore, there are some differences in the scope of application. If you want to connect between two different circuit boards, you can only use the traditional connector, but not the board-to-board connector. Five, different connection methods Traditional connectors mainly have plug, bayonet and threaded connections and other connection methods, while board-to-board connectors are used to solder, crimp, flip card connections and other connection methods. The differences in these methods also reflect the different designs and uses of the connector.

Wire harnesses are an essential part of various modern appliances, data transmission equipment, etc. As technology continues to develop, wiring harnesses are being used more and more extensively, and the way in which various harnesses are made is constantly being updated.Slot Connector Professional wire harness processing refers to the process of making various wire harnesses, including design, manufacturing and testing. When making wire harnesses, different harnesses need to be designed according to specific needs, including parameters such as core wire color, length, size, material, and markings. The production of wire harnesses needs to be processed according to the design drawings in accordance with the corresponding requirements.Board To Board Connector Professional wire harness processing can provide a variety of different wire harnesses, from common household appliances to various control harnesses for large machines and equipment. The materials used for wire harness processing also vary from plastic, metal, wire and cable. Therefore, making wire harnesses requires the selection of the right materials and processing techniques.Floating Connector In modern manufacturing, professional wire harness processing has become an essential part of the process. The process of making wire harnesses requires high-precision equipment and technology, mainly including: wire stripping machine, wire cutting machine, printing machine, glue filling machine, heat shrink tube cutting, crimping machine, soldering iron, etc. When making the wire harness, it needs to be equipped with a complete production line and related tools, as well as the guidance and operation of professional technicians. In the process of wire harness processing, all aspects of the product's performance, safety, reliability and use environment need to be fully considered. In order to ensure the quality of the product, it is also necessary to conduct multi-faceted tests on the wire harness, such as test resistance, insulation resistance, voltage resistance, heat resistance, etc. Only after multiple tests, the wiring harness can be guaranteed reliable and safe to use. In wire harness processing, it is often necessary to tailor the design to the customer's requirements in order to arrive at the most suitable solution. Therefore, experience, expertise and communication skills are crucial in wire harness processing. With professional wiring harness processing, a range of high-quality, customized wiring harness services can be provided to customers.

Board-to-board connector, also known as board-to-board connector, board-to-board connector, board-to-board connector, etc., is a kind of connector used on electrical and electronic products. It features stable connection, strong contact, easy plugging and unplugging, simple installation, etc. This connector has a wide range of applications, such as: computers, TVs, cell phones, stereos, industrial robots, etc.Floating Connector The components of the board-to-board connector are mainly composed of two parts: the female connector and the male connector. Usually, the female connector is fixed to the board and the male connector is plugged into the female connector. Both the female and male headers contain metal contacts, and the male headers are plugged in and out of the female headers. They are connected to each other through channels, and also allow for circuit board wiring and the transmission of signals and power between various parts of the board.Board To Board Connector Board-to-board connectors vary in shape and performance characteristics. According to the use of the occasion and requirements, board-to-board connectors can be divided into the following categories:Slot Connector Direct plug-in board-to-board connectors: the use of pins into the female chassis, through the snap to achieve fixed. This connector is easy to plug and unplug, and can be reused many times. Offset board-to-board connectors: different from the straight board-to-board connectors, inserted into the female chassis to tilt a certain angle, and then turn right after the engagement, through the snap to achieve fixed. This type of connector can be plugged and replaced without disassembling other devices, providing greater flexibility. Resilient contact board-to-board connectors: Resilient contact tabs are used instead of pins to insert into the female chassis, and are fixed by snaps. This connector can achieve successful docking in the case of inaccurate docking direction, while reducing the vibration caused by the docking and maintaining a stable connection, with a long service life. Face-to-board connectors: the use of metal or flexible materials directly with the board in the form of welding to achieve docking, no need for pins or other reinforcement mechanisms, space-saving, simple installation, but the plugging process is more difficult. No matter what kind of board-to-board connectors, its environmental performance has also become an important consideration. Some national and international environmental regulations on the production and sale of electronic products are higher requirements, board-to-board connector materials, structures and production processes are constantly being optimized and upgraded to meet the increasingly stringent environmental requirements at the same time, to better adapt to market demand.

A single-wire board-to-board connector is an electronic equipment connector that is primarily used to connect two single-wire boards to transmit electrical signals, data, power, etc. The connector consists of a number of small electrical contacts that connect wires and holes in the printed circuit board for reliable electronic equipment connections.Slot Connector Advantages of single-wire board-to-board connectors include High reliability: Single-wire board-to-board connectors use electrical contacts to connect and are more reliable than other types of connectors due to their larger contact area. The connector maintains a stable connection under changing conditions such as ambient temperature, vibration and humidity.Board To Board Connector Small size: Single-wire board-to-board connectors can provide compact connection solutions. The small size of this connector allows it to be easily installed on a variety of electronic devices. Its compact design also reduces the size of the board, thus saving space and increasing the reliability of the device.Floating Connector Superior transmission performance: The single-wire board-to-board connector is made of metallic conductive material and has excellent transmission performance. Its low inductance and low resistance reduce signal distortion and noise interference. In addition, the connector can also support high-speed data transmission to meet the transmission needs of different scenarios. Easy to use: The single-wire board-to-board connector can be plugged and connected, making device maintenance easier. Users can easily replace, add or remove electronic devices to suit different needs. In addition, the connector's simple structure can also reduce maintenance costs. Application scenarios for single-wire board-to-board connectors include Automotive electronics: Single-wire board-to-board connectors can be used in automotive electronics. In automotive electronics, connectors are required to have high temperature resistance, shock resistance, and water resistance. Single-wire board-to-board connectors are well suited to these requirements. Industrial automation equipment: single-wire board-to-board connectors can be used in the field of industrial automation equipment. In industrial automation equipment, connectors are required to support high current transmission and high-speed data transmission as well as long-term stability. Single-wire board-to-board connectors can meet these requirements. Smart home devices: single-wire board-to-board connectors can be used in smart home devices. As smart home devices are small, they require connectors with small size and high reliability. Single-wire board-to-board connectors fully meet these requirements. In short, single-wire board-to-board connectors are widely used in electronic equipment, its stable performance, superior transmission performance, small size and other characteristics are widely favored.

Board-to-board connector, also known as DIP connector, is a connector product with the highest transmission capacity of all connector types available. It can connect different circuit boards together with electrical isolation voltage up to 1200V and current capacity up to 2500A, which can meet the connection needs of various circuit boards. Board-to-board connectors are mainly used in electric power systems, communication networks, financial manufacturing, elevators, industrial automation, medical equipment, office equipment, home appliances, military manufacturing and other industries.Wire To Board Connector Power Connector At present, the main pitch of board-to-board connectors are 0.50mm, 0.60mm, 0.80mm, 1.00mm, 1.25mm, 1.50mm, 2.00mm, 2.50mm, 2.54mm, 3.96mm, etc. Board-to-board connectors can ensure stability and reliability in extreme environments such as high voltage, high current, and high temperature, and are therefore widely used in the connection of various circuit boards.Wire Harness

The purpose of the power connector is to connect power lines to electronic devices in order to provide power to the electronic devices. This connector is an essential component in electronic devices and its role is to connect the power lines to the electronic devices in order to provide power to the electronic devices.Slot Connector The role of the power connector is very important to ensure the stable operation of electronic equipment. The electronic components in electronic devices need electricity to operate, and the power connector connects the power lines to the electronic device in order to provide power to the electronic device. Without the power connector, the electronic components in the electronic equipment can not function properly, thus affecting the performance of the entire device.Board To Board Connector In addition to their important role in electronic equipment, power connectors can also be used for power transmission. In some large equipment, power connectors can transmit power from one place to another in order to provide power to the entire equipment. For example, in some factories, power needs to be transmitted from one place to another, and power connectors can transmit power from one substation to another in order to provide power to the entire factory.Floating Connector In addition, power connectors can be used for data transmission. In some situations where a large amount of data transmission is required, power connectors can transfer data from one place to another in order to provide data transmission services for the entire system. For example, in some Internet applications, data needs to be transferred from one server to another, and the power connector can transfer data from one network to another in order to provide data transfer services for the entire system. In short, the role of the power connector is very important. It can connect power lines to electronic devices in order to provide power to the electronic devices and ensure the stable operation of the electronic devices. In addition, it can also be used for power transmission and data transmission to provide services for the whole system. Therefore, when using the power connector, we need to carefully choose the right connector for our equipment and use it correctly.

A board-to-board connector is a common connection used in electronic devices to interface different electronic boards. It can transmit electrical signals from electronic board to electronic board so that different components can communicate with each other efficiently. This article will explain the definition, structure, application, and characteristics of the board-to-board connector.Slot Connector A. Definition Board-to-board connector is an interface used to connect different electronic boards. It can transfer electrical signals between electronic boards so that different components can communicate with each other efficiently. It uses a complex mechanical structure and electronic design to provide an efficient way of communication between different electronic devices.Board To Board Connector Second, the structure Plug: The plug of the board-to-board connector is composed of multiple metal pins. These pins are usually made of copper, phosphor bronze, nickel alloy and other materials. The plug can be automatically embedded in the socket to establish a connection.Floating Connector Receptacle: The receptacle is the other end of the board-to-board connector and consists of a pin holder and a receptacle housing. The socket is usually made of some fine piece of metal that can be precision mated to the plug. The socket housing is usually made of plastic or metal material to protect the electronic components inside the connector. Spring structure: The plug and receptacle of board-to-board connectors usually have a spring structure that allows them to automatically embed and form a stable connection when inserted. Protective structures: To protect plugs and sockets from the outside environment, connectors often use sealed structures or hermetic covers to protect plugs and sockets. These protective structures can prevent dust, moisture, corrosion, etc. from affecting the normal operation of the connector. Third, the application TV: In today's TV sets, board-to-board connectors are used to connect the motherboard to the panel so that the viewing signal can be transmitted to the TV screen. Cell phones: board-to-board connectors play a vital role in the design of cell phones, which can be connected to different circuit boards to achieve information transfer between the various components of the phone and the realization of the function. Computers: In modern computers, board-to-board connectors are used for communication connections between various components such as CPU boards and motherboards, monitors and motherboards, and sound card boards and motherboards. Other equipment: board-to-board connectors are also widely used in a variety of other electronic equipment, such as medical equipment, automobiles, robots and so on, has become an integral part of modern electronic equipment. IV. Features High stability: The board-to-board connector uses a spring-loaded mechanical interface that ensures the stability of the connection and higher connection quality. Strong anti-interference ability: board-to-board connectors use high-quality electronic components and sealing structure, can effectively prevent interference. Reasonable structural design: The structure of the board-to-board connector is finely designed and the protection structure is sound, which can adapt to various environments. Long service life: board-to-board connectors use high-quality materials and precision processing and manufacturing processes, to ensure a long service life of the connector. In short, the board-to-board connector is one of the important interface components of electronic equipment, it can make the communication between different electronic boards more efficient and more effective. With the continuous development of science and technology, the application of board-to-board connectors is becoming more and more widespread.

Power connector, is a connector that connects the power cord to the device. In real life, the power connector is widely used in home appliances, computers, monitors and other various devices, plays a vital role. Below, I will explain the role of power connectors, types, purchase considerations and other aspects, I hope the reader will help.Wire To Board Connector First, the role of power connectors Wire Harness The main role of the power connector is the power cord and the need for power supply equipment connected to ensure the normal operation of equipment through the transmission of electrical energy. In household appliances, such as refrigerators, air conditioners, televisions, etc., the power connector will be directly welded to the inside of the device, such as a failure requires replacement, the need to disassemble the device before it can be replaced. And in some equipment that needs to be disassembled often, such as computers, monitors, etc., the use of plug-in power connectors, convenient for users.Floating Connector Second, the type of power connector Direct plug-in power connector This power connector is inserted directly into the device power interface, with a simple structure, low cost and other advantages, widely used in household appliances and other equipment. External power connector This power connector is through the connector interface to connect the power cord to the outside of the appliance, easy to use, flexible, widely used in embedded systems such as Raspberry Pi products. Waterproof power connector This power connector is waterproof, dustproof, shockproof and other characteristics, is widely used in outdoor equipment, machinery and equipment and other fields. Third, the power connector purchase considerations Need to clarify the power requirements of the device before the selection, to ensure that the selected power connector rated voltage, rated current and other parameters meet the requirements of the device. Choose a good reputation, good reputation brand to ensure the quality of reliable products to avoid damage to the equipment caused by poor quality power connectors. According to the actual use of the equipment, choose the right type of power connector. For example, in outdoor application scenarios, waterproof power connectors should be selected.

Power connector design steps One: high compactness, there are now connectors with a pitch of only 3.00 mm, can carry up to 5.0 amps of rated current, the connector is made of high-temperature LCP material, technology has been tested over time to ensure long-term excellent performance and reliability, including data communications equipment and heavy industry, including almost any industry sector.Slot Connector Second: flexibility, in addition to the high compactness of this design feature, power connectors must be extremely flexible in the design process. Design can combine compactness with excellent current density, to meet the high voltage and high current applications to take the ultra-narrow design, each blade can provide up to 34 amps of current, up to +125 ° C operating temperature.Floating Connector Third: heat dissipation, another point, in response to the most important heat dissipation performance of the power supply system, the connector design has a direct impact on the internal airflow of the power supply, but the user does not rely solely on the connector design to solve the heat dissipation problem. In order to optimize the system design, other factors must also be considered, such as the amount of copper on the PCB, copper can help absorb the heat of the connector interface. Fourth: high efficiency, at the same time, in order to meet the demand for higher power efficiency, can provide more with high compact and high current characteristics of the solution. Because higher current can improve the power or safety factor, while high-performance contact design can really achieve hot-plug function, low dropout design to ensure that the generation of heat to a minimum.

The basic performance of the connector The basic functions of the connector can be divided into three main categories: namely, mechanical functions, electrical functions and environmental functions.Slot Connector 1.mechanical function on the connection function, plugging force is an important mechanical function. Plugging force is divided into stabbing force and pull-out force (pull-out force is also known as the force of separation), the requirements of the two are different. In the relevant standards have Z large thrust force and Z small parting force rules, which indicates that, from the point of view of application, thrust force to be small (and then there is a low thrust force LIF and no thrust force ZIF structure), and parting force if too small, it will affect the reliability of the touch. Another important mechanical function is the mechanical life of the connector. Mechanical life is actually a durability (durability) target, in the national standard GB5095 called it mechanical operation. It is a stabbing and a pull out as a cycle, to the rules of plugging and unplugging cycle after the connector can normally complete its connection function (such as touch resistance value) as the basis for judging. Connector plugging force and mechanical life and touch the structure of the parts (positive pressure) touch parts of the quality of the coating (coefficient of sliding friction) and touch the size of the arrangement of precision (alignment) related. 2 electrical function of the connector's primary electrical function contains touch resistance, insulation resistance and electrical strength. Because of the development of digital skills, in order to connect and transmit high-speed digital pulse signal, there is a new type of connector that is high-speed signal connector, accordingly, in the electrical function, in addition to the characteristic impedance, there are some new electrical targets, such as crosstalk (crosstalk), transmission delay (delay), time lag (skew), etc. 3. Environmental features common environmental features include temperature, humidity, salt spray, oscillation and shock, etc.

What are the advantages of the connector? Connector is a common connection medium for electronic engineers. The design and production process of the connector is more convenient and flexible, but also reduces production and maintenance costs. Here we take a look at the advantages of the connector. 1. The connector coating corrosion protection function. The first thing to consider in the production of connectors is corrosion protection. Most of the electronic connector contact shrapnel made of copper alloy, in the typical working environment of electrical connectors, such as oxidation, sulfurization, etc., prone to corrosion. In fact, contact coatings are used to isolate the contact shrapnel from the working environment to prevent copper corrosion. As an important function of corrosion protection, optimizing the interface is a consideration in selecting the appropriate contact coating material. 2. Connector coatings help to improve mechanical properties. The parameters related to mechanical properties are mainly factors that affect the durability or wear of the coating and the bonding force. These factors to be considered are two different views under the same basic effect, i.e., the sharing of cold welds at multi-point contact interfaces during relative motion. Important mechanical properties include the hardness, ductility and coefficient of friction of the coating material. All these properties depend on the inherent nature of the coating material and its processing. 3. Connector coatings help to improve the electrical performance. One of the main requirements for the electrical performance of the connector is to establish and maintain a stable connector impedance. For this purpose, a metallic contact interface is required to provide this inherent stability. The establishment of this contact interface requires a surface film that can be avoided or cracked during contact and mating. 4. The connector is characterized by the plating of precious metals. Precious metal coatings (e.g., gold, palladium and their alloys) are intrinsically free of the surface film to varying degrees. For these coatings, metal contact at the interface is relatively simple, as it only requires the contact surface partner to move during the fit. In order to keep the contact interface impedance stable, connector design requires that the precious metal of the contact surface should remain constant to prevent the influence of external factors such as contaminants, base metal diffusion, and contact wear. 5. Let the connector take advantage of the properties of ordinary metal plating. Ordinary metal coatings, especially tin or tin alloy, are naturally covered with an oxide film. The role of tin contact coating is that this oxide layer is easily destroyed when mating, making it easy to establish metal contact. The requirements of the electrical connector design is to ensure that the oxide film will break when the connector is mated, and the contact interface will not be re-oxidized during the life of the electrical connector. Re-oxidation corrosion in wear corrosion is the main mechanism for the degradation of tin contact plating performance. Silver contact plating should be considered as common metal plating as far as possible, because it is susceptible to corrosion by sulfides and chlorides. Due to the classic formation of valves, nickel plating is usually considered as a common metal.

Wire Harness What is it? A wiring harness provides overall service equipment for a particular load source group, such as trunking, switching equipment, control systems, etc. I. The basic study of voice service theory is to investigate the relationship between traffic volume, call loss, and harness capacity. Therefore, the wire harness is an important fundamental concept in voice service theory. ii. The service object of the wire harness is the load source, which usually refers to the subscriber equipment; in a broad sense, the higher level equipment is the load source for the lower level equipment. In communications, the load source is also referred to as the call source, and the number of serving devices contained in the harness is referred to as the harness capacity. iii. The standard of a wire harness depends mainly on the calculation of its crimp rate, which requires special instruments, mainly by cutting, polishing, etching, observing, and measuring. Several steps such as quantity and calculation are done.

Board To Board Connector The test and inspection methods A. Testing and inspection of board-to-board connectors: 1) Note that the load voltage on the board-to-board connector should not exceed 50% of its rated voltage 2) The mounting dimensions of the board-to-board connector used to insert the connector, the length of the solder pins on the welded PCB should be greater than 0.5 mm 3) For higher precision board-to-board connectors, try to choose a slightly positioned model if the PCB space allows, in order to facilitate the operation of the need for handing welding 4)Check if there is a dummy-proof design- 5)Check if the material used in the board-to-board connector contains lead 6) For small contact pressure, small size board-to-board connectors with small current electrolux, it is recommended to use gold-plated or silver-plated connectors to avoid the effect of Dong film by Yang 7) pay attention to observe the height of the board-to-board connector after docking whether the PCB around the components of the welding height: assembly height must be greater than the PCB around the components of the welding height, and to have a certain margin to ensure that does not involve-especially after PCB welding may be the height of the components error.

What is a power connector? A power connector is a device that allows electricity to flow in a home or commercial building environment. A power connector draws current by connecting to a mains power source. Depending on the type of power connector, the voltage and specifications of electrical plugs in many different environments are different. Due to the development of technology and versatility, there are about 20 different types of power connectors worldwide. The shape and specifications of power connectors have changed over time, and the power connectors in older buildings are often very different from the products used today. Power connectors in older buildings may not be as safe as newer power connectors, as the times have also driven more modifications regarding safety regulations.Board To Board Connector A power connector is a portable item that is usually connected to an energized circuit located in most cases at the bottom location of various types of locations. A more common term than power connector is a plug or socket that plugs into an output port to generate electrical energy. This plug has the common feature of having protruding pins that can be inserted into slots or holes that generate electrical currents that can power any item that depends on electrical power to operate.